Insulating tape and shielding tape production system for molded high-voltage cable flexible joint
The preparation method of the wrap-around molded flexible joint is complementary to the extrusion molding method. It is very effective for the preparation of the high-voltage cable flexible joint.
Classification:
New Product Center
Product Center
Impurity Detector
Impurity Detector
Key words:
Product accessories:
E-mail:
Insulating tape and shielding tape production system for molded high-voltage cable flexible joint
The preparation method of the wrap-around molded flexible joint is complementary to the extrusion molding method. It is very effective for the preparation of the high-voltage cable flexible joint. Especially when the fault is repaired, the wrap-around molding method is more convenient and effective. In addition, foreign reports indicate that all cable joints below 138kV tend to use wrap-around molding technology, which is more meaningful for domestic system applications below 110kV.The insulation and shielding layer wrapping tape production system are developed based on the integrated technology of polymer material extrusion, casting and slitting, equipped with a real-time detection system for impurities in the insulation tape with electronic cameras.
Insulation tape production system composition: defect-free single screw extruder, casting and slitting machine, film casting die, electronic camera impurity inspection, dual-channel independent mold temperature machine.
挤出系统 / Extrusion system | |
电源 Power supply | 3×380V,50/60 Hz ,+N +PE |
电机 Motor | 3 kW 伺服电机 3kW servo motor |
减速比 Reduction ratio | 1:15 |
螺杆直径 Screw diameter | 30mm |
长径比（L:D) Screw L:D | 25 :1 |
螺杆材质 Screw material | 38 CrMoAlA |
温控系统 Temp control system | 日本 RKC, 加热冷却双 PID 控制 RKC company of Japan, heating and cooling dual PID control |
最高可控温度 Maximum controllable temperature | 350℃ |
温度传感器 Temperature sensor | J 型热电偶 J type thermocouple |
喂料方式 Feeding | 体积喂料 Volumetric feeder |
加热区 Heating zone | 8 区电加热（螺筒 3 区加热冷却，机颈 1 区，模具共 4 区加热） 8 zones of electric heating (3 zones for heating and cooling of the screw barrel, 1 zone for the machine neck, 4 zones for the die heating) |
加热总功率 Heating power | 6.0kW |
冷却方式 Cooling | 风冷 Wind |
流延模具 / Film casting die | |||
模具总体尺寸 Overall die size | 320×250×170mm | 模口宽度 Width of die lip | 250mm |
模具模口可调尺寸 Adjustable size of die lip | 0.02~2.5mm | 成膜厚度 Thickness of film | 0.02~0.5mm |
流延分切系统 / Casting slitting system | |||
电源 Power supply | 3×380V,50/60 Hz ,+N +PE | 流延辊直径 Casting roller diameter | 150mm |
流延辊中心高 Center height of casting roller | 1022 mm | 流延膜模具尺寸 Film casting | 150mm*0.02~2.5mm 厚度可调 Adjustable thickness |
流延成膜宽度 Film width of casting | < 120 mm | 流延成膜厚度 Film thickness of casting | 0.08~0.5mm |
流延棍冷却方式 Casting roller cooling method | 水冷（水温可控） Water(controllable water temperature) | ||
杂质检测光学系统 / Impurity detection optical system | |||
测量厚度 Measurement thickness | 0.04~1 mm | 分辨率 Resolution | 20μm |
视场宽度 Field width | 0~100 mm | 检出率 Detection rates | 100% |
测试速度 Speed of measurement | >1kg/h | 室内环境 Work environment | 一万级 The class often thousand |
使用温度 Operating temperature | 0 ~ +40℃ | 收膜速度 Charging film speed | 0~110mm/s |
环境湿度 Environment humidity | < 65% | ||
Previous
Next
Other Content
Online message
* Note: Please be sure to fill in the information accurately and keep the communication unblocked. We will get in touch with you as soon as possible.
Address:
No.10, 12th Avenue Hanan road, Nangang district, Harbin,China
Main Products
Can't find the product you are looking!
If you need to consult our products, please leave your contact information to us, we will contact you within 24 hours.